Drive In metal shelving
Drive In metal shelving. With drive-in and drive-through racking, load units are stored on the racking depth one after the other on two con- tinuous shelves. A loading/unloading cycle per racking field from the top to the bottom (or the other way round) must be observed during depositing and retrieval. The trucks can drive into the racking lanes. With drive-in racking, rack servic- ing is only possible from one side (Lifo method). With drive-through racking in contrast, depositing can be carried out from one side and at the same
time retrieval from the other side (Fifo method). Compared with drive-in racking, throughput is therefore higher with drive-through racking.
 |
brochure MetalShelvings ( 3.18 MB) |
Ask for quotation
* = Data required
Report this article
Report this article to a friend: Enter your address and any message.
All fields are required
LA MERCANTI Srl